Ball Cork – Single Union
Ball Cork – Single Union has various sizes ranging from :
20 mm – 110 mm
Their prices depend on the size of the valve : Ksh. 150 – Ksh 4,500
Ball Cork – Single Union in Kenya
Aqua Hub Kenya is the best and affordable supplier of Ball Cork – Single Union in Kenya. Ballcocks are used as control valves in an irrigation system. When we partition our farm design into block, we use ballcocks to enable the farmer to irrigate each section at ago.
How does a union ball valve work?
Simply for opening and closing water flow systems. Regulating the volumes needed at given time is the main purpose why Aqua Hub Kenya recommends the item. Ball valves only turn through 90 degrees, which can make it difficult to accurately control flow rates. Double union ball valves allow the body to be removed for servicing, while single union valves do not. A ball valve has a full-bore flow when open. Ball valves are the least likely valve type to block or foul.
How do you install a single union ball valve?
Using the specific type of Glue for PVC fittings. The steps are straight and easy to understand.
- Apply the glue on the inner part of the ball cork
- Also apply the glue on the outer part of the pipe that is yet to be connected to the fitting
- Flatter the pipes to discourage lack of uniformity in fitting
Ball Cork – Single Union prices in Kenya
Aqua Hub Kenya offers best deals to the farmers and our prices range from 150/- to, 4500 depending on the ballcock size
Related products
End cap
End caps act as protective device and are designed to protect pipe ends of various shapes. The main purpose of using pipe caps is to waterproof the connections. They are also used to close the ends of hydraulic or pneumatic pipes and tubes. They are used in the plumbing apparatus of domestic, commercial and industrial water supply lines, machinery and processing equipment etc. They are also fitted on water pump lines with the sole purpose of removing air blocks. Pipe caps are highly demanded as an important category of pipe fittings.
Foot valve
A foot valve is a sort of check valve that is often located at the bottom of a pipeline or at a pump (hence the name). Foot valves function similarly to ball check valves, but they have an open end with a shield or screen covering it to prevent debris from entering the line.
Foot valves keep the suction line between the tank and the pump set primed by preventing oil from returning to the main tank. Foot valves offer a better level of safety than check valves, which may be situated closer to the pump set.
HDPE Couplings
HDPE Coupling Prices in Kenya
We sell strong and high quality HDPE Couplings in Kenya. Their prices range from KES. 100/- to KES 15,00 depending on their sizes.
Find the attached price list.
<tr>
<td>AQH/PP MC/006PN-16</td>63 mm<td>800</table>Call us for orders : +254790719020
| Item Number | idth="147">Pressure rating | Available Sizes | Prices | |
| AQH/PP MC/001 | PN-16 | 20 mm | 100 | |
| AQH/PP MC/002 | PN-16 | 25 mm | 150 | |
| AQH/PP MC/003</td> | PN-16 | 32 mm | 200 | |
| AQH/PP MC/004 | PN-16 | 40 mm | 350 | |
| AQH/PP MC/005 | PN-16 | 50 mm | 550 | |
| AQH/PP MC/007 | PN-16 | 75 mm | 2500 | |
| AQH/PP MC/008 | PN-16 | 90 mm | 3500 | |
| AQH/PP MC/009 | PN-16 | 110 mm | 4500 | |
